Piteas Supported DEXs on PulseChain - PulseX, Phux, 9inch, 9mm & More

DeFi & Aggregators

If you have ever asked "piteas aggregates which dexs pulsechain?" or searched for the full piteas supported dexs pulsechain list, this page is the answer. Piteas is a DEX aggregator on PulseChain that unifies liquidity from 13+ integrated sources and over 6,000 active pools, and the piteas aggregator pulsechain dexs are the venues that the Pathfinder routing engine scans on every quote to find the best price, the lowest slippage, and the most efficient route for any token swap.

For the broader protocol overview, see the main Piteas PulseChain DEX aggregator guide. This page focuses specifically on the individual DEXs Piteas integrates - what each one is, what pool types it offers, and why it matters for routing - so you understand exactly where your swap liquidity comes from.

Why the list of supported DEXs matters

The whole point of a DEX aggregator is that a trader does not need to know which single DEX has the best pool for their trade - the aggregator figures that out. But the quality of aggregation depends entirely on which DEXs are integrated, and how deeply. A piteas pulsechain router that only scanned PulseX would miss the deep concentrated liquidity on 9mm, the weighted pools on Phux, and the niche long-tail pools on DexTop. Piteas integrates all of them at the contract level, so the routing graph spans the union of every meaningful PulseChain liquidity venue.

That is also why piteas consistently beats generalist multi-chain aggregators on PulseChain pairs: it treats every pool on the network as a first-class citizen of its routing graph, with native support for each DEX's pool math (constant product, stable swap, weighted, and concentrated liquidity) rather than routing through wrappers. The result is access to over $641M in liquidity across 13+ DEXs and 6,000+ pools in a single swap.

The DEXs Piteas aggregates on PulseChain

The piteas aggregator pulsechain dexs are a curated set of PulseChain DEXs that together account for the overwhelming majority of liquidity on the network. Each integration is implemented at the contract level, so piteas treats the underlying pool math natively. The current list is below, and it is expanded over time as new high-quality liquidity venues come online.

PulseX (V1, V2, Stable)

PulseX is the flagship decentralized exchange of PulseChain and the single largest source of liquidity on the network. Piteas integrates the full set of PulseX pool types: the original V1 pools, the upgraded V2 constant-product pools, and the stable pools optimized for low-slippage trades between pegged assets. Because of PulseX's dominance, a substantial fraction of piteas routes terminate in or pass through a PulseX pool.

Phux.io

Phux is a Balancer-style DEX on PulseChain that supports stable pools and weighted pools with arbitrary token-weight configurations. Weighted pools let Phux offer efficient pricing on multi-asset baskets that traditional two-token AMMs cannot model well, giving the piteas routing graph access to liquidity profiles no constant-product AMM can replicate.

9inch DEX

9inch is a multi-version DEX on PulseChain that supports V2-style constant-product pools, V3-style concentrated liquidity, and stable pools tuned for pegged assets. Its pool diversity makes it a useful complement to PulseX in the piteas routing graph, particularly for pairs where 9inch hosts the deepest pool or where its concentrated-liquidity ranges are positioned favorably for the current market price.

9mm DEX

9mm is another concentrated-liquidity DEX on PulseChain offering V2 and V3 pool architectures. Its V3 pools let liquidity providers focus capital within specific price ranges, producing deeper effective liquidity for in-range trades than equivalently sized constant-product pools. For piteas, 9mm is a frequent contributor to optimal routes on actively traded pairs.

Tide

Tide is a PulseChain DEX that emphasizes V3-style concentrated liquidity for both stable and weighted pool configurations. Its pools often host efficient liquidity for stablecoin pairs and other tightly correlated assets, and piteas integrates Tide pools into its routing graph with the appropriate concentrated-liquidity math.

DexTop

DexTop is an AMM-style DEX on PulseChain whose pools are integrated into the piteas routing graph as constant-product edges. While DexTop is smaller in absolute liquidity than PulseX, it occasionally hosts the most efficient pool for niche or long-tail tokens, and piteas treats it as a fully-supported source of liquidity.

Liberty V3

Liberty V3 is a concentrated-liquidity DEX on PulseChain that brings additional V3-style pool depth into the piteas routing graph. Including Liberty V3 broadens the set of in-range concentrated liquidity that Pathfinder can split a trade across, which improves execution on pairs where Liberty V3 ranges are positioned near the current market price.

How Pathfinder uses these DEXs

Every supported DEX is queried in real time as part of each piteas quote. Pathfinder treats every supported token as a node and every liquidity pool as a weighted edge, then runs a split-route optimization that can fill part of an order on PulseX, part on 9mm, and part on Phux in parallel - whatever combination maximizes net output after fees, slippage, and gas. Reserves, fee tiers, and pool-specific math (constant product, stable swap, weighted, and concentrated liquidity) are all accounted for in the routing decision.

Because the routing engine recalculates within sub-second latency, the quote stays fresh as pool reserves shift with every block. And because execution is atomic through the piteas router contract, the entire swap either succeeds in full or reverts in full - no partial fills, no orphaned intermediate balances, and no exposure to MEV on individual legs of a multi-hop route.

MEV protection across all integrated DEXs

Routing across many DEXs would normally increase exposure to sandwich attacks, since a larger routing graph means more public mempool surface. Piteas counters this with flashbot-style private routing: pending transactions are concealed from public observers, and on-chain output guarantees revert any swap that fails to deliver the trader's minimum acceptable output. This neutralizes front-running and sandwich attacks regardless of which combination of integrated DEXs a route passes through.

Developers: the Swap API exposes every integrated DEX

For builders, the piteas public Swap API exposes the same routing intelligence that powers the piteas app - meaning any wallet, dApp, bot, or backend service can source best-execution quotes across all 13+ integrated DEXs and 6,000+ pools without re-implementing the routing problem. A configurable embeddable widget drops a full swap interface into any third-party application, handling wallet connection, quote display, and execution across the entire integrated DEX set.

Key takeaways

The piteas supported dexs pulsechain list is what makes the aggregator work - without deep, native integration of every meaningful PulseChain DEX, there is no best execution. By unifying PulseX, Phux, 9inch, 9mm, Tide, DexTop, and Liberty V3 into one routing graph, piteas turns fragmented PulseChain liquidity into a single optimized swap. For the full protocol overview, return to the Piteas PulseChain DEX aggregator guide.

Frequently asked questions

Which DEXs does Piteas aggregate on PulseChain?

Piteas aggregates PulseX (V1, V2, Stable), Phux.io, 9inch DEX, 9mm DEX, Tide, DexTop, and Liberty V3 - 13+ integrated liquidity sources and over 6,000 active pools on PulseChain.

How many DEXs and pools does Piteas integrate?

Piteas integrates 13+ liquidity sources spanning more than 6,000 active pools, giving access to over $641M in liquidity on PulseChain.

Does Piteas support PulseX V1, V2, and stable pools?

Yes. Piteas integrates the full set of PulseX pool types - the original V1 pools, the upgraded V2 constant-product pools, and the stable pools optimized for low-slippage trades between pegged assets.

Does Piteas support concentrated liquidity DEXs like 9mm and Liberty V3?

Yes. Piteas natively supports V3-style concentrated liquidity from 9mm and Liberty V3, using the appropriate concentrated-liquidity math so in-range depth is correctly weighted in the routing graph.

How does Piteas pick which DEX to route through?

The Pathfinder routing engine evaluates every integrated DEX on every quote and splits the swap across the combination of pools that maximizes net output after fees, slippage, and gas - sometimes a single deep PulseX pool, sometimes a multi-hop split across several DEXs.

Are swaps protected from MEV when routing across many DEXs?

Yes. Piteas uses flashbot-style private routing to conceal pending transactions, and on-chain output guarantees revert any swap that fails to deliver the minimum acceptable output, neutralizing sandwich attacks and front-running across every integrated DEX.